Technics 3010 User Manual

AS/400® Printing through a Remote Output Queue using the WORKiO® DP-2310/3010/3510/3520/4510/4520/6010/6020 - 1 -

Type in ‘*PANASONIC6010’ and hit <Enter>. You will now see the previous screen again with the new information you have chosen. Now tab down

Hit <Page Down> and the other item that should be entered is just a text description. This will make it easier to identify while working wit

Sending a print job to the DP-6010 First of all, we must generate a print job so that we can direct it to the correct output queue. For this di

As you can see by the status line, the information was printed successfully! Now we need to access those printed files to direct them to the newly

Now we can change the output queue this job is directed to. For our example, enter ‘DP-6010’ in this field. Some other important items we can

Some of the items on this page are what drawer to pull from and whether the job is going to be duplexed or not. Now hit <Page Down> again to

These are the last 2 pages, although there really isn’t much here that applies to our machines. Now hit <Enter> to process the job. This

Now to look at our output queue we use the ‘WRKOUTQ’ command. This will bring up a list of all output queues we could work with. Tab down to

As with many AS/400 commands, there are shortcuts to get there faster. Instead of using the ‘WRKOUTQ’ command by itself, then choosing the correct

Our example above has 3 files ‘queued’ for printing and their status is ‘RDY’, yet another TLA, it of course stands for ‘Ready to print’. On the O

Contents Section Page Overview …………………………………………………………………………………. 3 Printing to the DP-23/30/35/45/6010/35/45/6020…………………………………. 5 Cr

Quick Setup Guide Remote Output Queue setup Command CRTOUTQ Output queue Enter desired name (e.g. DP6010, etc.) Remote system *INTNETA

Notes: AS/400® is a registered trademark of IBM Corporation WORKiO® is a registered trademark

Overview This document is designed to provide basic information regarding printing from an IBM AS/400 server running the OS400 operating system V5

Some of the other TLA’s you might hear when discussing the AS/400 and printing are: SCS Printing = SNA Character String AFP Printing = Advanced Fu

Printing to the DP-6010 For the purposes of this document, we will assume that a DP-6010 has already been setup with an IP Address, has the DA-PC

The screen that appears shows the various optional settings for the output queue. Note that the top of the screen shows the command you entered so

Enter ‘*INTNETADR’ in this field and hit <Enter>. This will indicate we will be sending the output of this queue to a TCP/IP address. After

On this screen, enter the following information. At ‘Writers to autostart’, enter a ‘1’. This will allow the print writer to start after we create

Hitting <F4> allows you to see the choices for this particular field. You could use the <F4> key for each choice to see the available o